Technical Tips on Running the Program
22. Dec. 1990
- You may do Blow-Can't Blow after each process or session. Sometimes it is required (at
least the Blow Steps) after each set of commands on each Rud - to free the MOCOs, etc.
loosened up.
- After completion of each process (and after any B/CB at the end of it) indicate
any "wrong items" to the body org which it may have picked up during the
process. Then get the "right item" or "none" per ULR tech and
indicate that too.
- In doing the "6 Ruds" part of the program, if it feels "complete"
on an answer and there is no E/Sim or False, Reverse False, LD or SIN buttons active
on meter, but the meter won't F/N or FTA, then ask: "How many times was that
done" (or "did it happen")? Establish by "orders of
magnitude" counting and the correct number will come with the F/N or FTA. You may
be surprised that some of these "out ruds" have occurred millions, billions,
trillions or even quadrillions or more times!
Note:
This "counting" procedure may have to be done on Process 1, 2 or 3
if it bogs (no more answers) with no EP.
BR
Sr C/S Ron's
